Case Study · Tech-Effector® Tandem Tooling Boom

From 8 hours to 20 minutes

How a Tier 1 automotive supplier cut stamping line changeovers by 95.8%.

Explore Tech-Effector®
A Tech Rim Standards tandem tooling boom mounted on a robot arm above a stamping press, carrying modular branches with vacuum cups on a perforated rail receiver.

Tandem tooling boom in production on the press line

95.8%Faster changeovers
$400k+Estimated first-year savings
10×Tooling repeatability
The Problem

Challenge

A Tier 1 automotive supplier was losing an entire shift of press time every time a job changed. Each changeover meant rebuilding the full tooling setup from the ground up, averaging 8 hours of downtime. On top of that, the legacy booms were so heavy that swapping them by hand was physically taxing and hazardous for operators.

Add in the service costs of bringing tooling-provider technicians on-site for every changeover, and productivity, safety, and profitability were all taking a hit.

What Success Looked Like

Objectives

  • Win back press time across 250 changeovers per year
  • Cut the 8-hour changeover that idled presses for a full shift
  • Take heavy booms out of operators' hands
  • Reduce reliance on on-site tooling-provider technicians
  • Make every new job launch lighter on labor
What We Did

Solution

The supplier implemented Tech Rim Standards tandem tooling boom receivers throughout the press line. The system introduced a modular tooling approach that eliminated the need for complete tooling rebuilds during job changes, while also removing the manual strain and safety risk associated with swapping the old, heavy boom assemblies.

Using the manual tool changer receiver and bayonets, the line could accommodate multiple sets of modular fingers configured for specific production runs. Instead of rebuilding the tooling arrangement for each new job, operators could simply remove the current branch set and install the one required for the next application, cutting changeover time from hours to minutes.

Before Legacy stamping transfer boom: a long one-piece aluminum tube with fixed black cross arms and vacuum cups, built as a single heavy assembly.
The legacy boom — a single heavy assembly that had to be rebuilt from the ground up for every job change.
After Tech-Effector tandem tooling boom: a perforated modular rail receiver carrying removable branch sets, routed vacuum lines, and a tool changer at the robot mount.
The tandem boom receiver — modular branch sets swap out in minutes for the next application.
We didn't just receive uptime improvements, but safety and repeatability as well. The old big booms were extremely heavy and taxing on operators to swap. The robot tool changer and mushroom docking systems have increased repeatability tenfold. And the octagon-style tooling has been major for boom stiffness, which has improved cycle time through repeatability.

Sr. OT Automation Engineer Tier 1 Automotive Supplier

In Summary

Conclusion

By adopting Tech Rim Standards' tandem tooling boom receiver technology, the supplier transformed tooling changeovers from a major operational bottleneck into a fast, safe, and repeatable process. Ten months into near-continuous, around-the-clock operation, those gains have held steady — evidence that the results are durable, not a short-term bump.

Losing a shift to every changeover?

Tell us about your line and your tooling. We'll show you what a modular tandem boom receiver system would look like for your application.